254x89mm

DC FAN 254x89mm

Size: 254X89 mm.
Motor: Brushless DC Motor
Motor protected: 1,.polarity+over current shutdown protected. (OCP)
Frame(Houseing): Aluminum die-cast. AP: Painted black.
Impeller: PBT + 30% fiber glass. Black color, UL94V-0.
Lead wire: 1007#22AWG. UL/CSA.
Insulation resistance: Min.10M Ohm at 500 VDC between terminal and the frame.
Bearing type: B: 2 ball bearing.
Operating Temp: Ball bearing: within-20~80 degree C
Life expectancy: Ball bearing: 50,000 hours at 60 degree C.
Above measurements humidity at: 65%+-15%.
Safety Approvals: CE
CONNECTOR: L: lead wire

Detail

DC FAN Download PDF

MODEL NO.	RATED	RATED	RATED	VOLTAGE	MAX. AIR		MAX.AIR		NOISE
	RATED	AMP	RPM	RATED VDC	FLOW		PRESSURE		NOISE
	VDC	A	RPM	VDC	CMM	CFM	MM/H20	INCH/H20	DBA
25489D1-HBAPL	12	2.0	2000	9~13.8	20.7	730	9.4	0.37	60
25489D1-MBAPL	12	1.5	1600	9~13.8	15.3	540	7.9	0.31	53
25489D2-HBAPL	24	1.25	2000	16~28	20.7	730	9.4	0.37	60
25489D2-MBAPL	24	0.75	1600	16~28	15.3	540	7.9	0.31	53
25489D4-HBAPL	48	0.63	2000	36~56	20.7	730	9.4	0.37	60
25489D4-MBAPL	48	0.36	1600	36~56	15.3	540	7.9	0.31	53

Remark :
　● The above specification data are for reference only, general data tolerance ± 10%
　● Ball Bearing types are 2 Ball Bearing
　● Special design are requested available, please inform us now.
　● Sunta reserves the right to change the data without notice.

Optional Function and Lead wire color

FG : Tachometer speed sensor output signal, open collector 2 square waves per revoluation, lead wire color is white
RD：Alarm output signal：（motor run-Low, motor stop-High）, lead wire color is yellow.
VR: NTC speed control, NTC ther mister thermal control 1800~3400RPM/4.7~10K ohm
Vs 45~20C speed control, lead wire color is orange
VR speed control: VR adjustable speed control 0~2000RPM/0~10K ohm lead wire color is gray
PWM (Pulse Width Modulation): programmable MCU multiple speed control 10~100%, full stop & 10 speed stages,
800~2000RPM each stage 300 RPM, lead wire is Green trace of white
DC FAN

Back